Showing posts with label driver loft. Show all posts
Showing posts with label driver loft. Show all posts

Monday, March 21, 2011

Do You REALLY Know Your Driver Loft?

This past weekend I had the opportunity to spend a day and a half with Dana Upshaw, Dana Golf in Warner Robins, GA. Dana is acknowledged as one of the premier clubfitters in the world, and I did all I could to soak up as much knowledge as possible from him.


One of the things that I watched him doing during a fitting was to measure the loft of the driver for the player he was fitting. Pretty standard stuff, but also pretty important to understanding club performance. He has been collecting data on real versus marked driver lofts for awhile now, and most often the true measured loft of the club is not what is marked on it - sometimes by a few degrees.


This matters because - for example - you might really be playing a driver with either too much or too little loft. This happened on Friday, when the player Dana was fitting wondered why he was hitting his driver too high - and Dana found out that the loft of the driver was a few degrees more than expected.


I started a similar effort tonight, to start collecting data on driver lofts. For my first opportunity I measured the loft of what was supposed to be a 9.5 degree driver, and found it to be 11 degrees. More data on this effort will be reported in the future!


Tony

Monday, October 18, 2010

Higher IS Further!!

At the AGCP Roundtable 5, we had the treat of listening to Tom Wishon (Tom Wishon Golf) talk for about 2 hours on things he has learned from working in the golf club business for about 40 years.


He noted his belief that the top 3 factors that have a major influence on driving distance are (in order of importance):

1. Driver loft
2. Driver length
3. Driver MOI/Swingweight


I believe that shaft flex and shaft flex profile are also important in fitting for distance - but I think Tom's point is that the three factors above play the Most important role in obtaining more distance.


The more I have thought about this in the past month, the more I agree with him. I recall one of the best driver fittings that I have ever done, and what I did was put the player into a 13 degree driver with a 43 inch length. This was for a player over 70 years old who I do not think has ever hit his drives 200 yards - but he could with this club.


I also think about what I see from the "big boys" on the PGA Tour. I do not think you ever see drives that are low and boring any more - they all fly high and carry long. All of their drives fly significantly higher than I know my drives do.


But the majority of drivers that we see in stores are still 9.5 degrees, 10 degrees, 10.5 degrees of loft. Maybe good for players who have 100 plus mph swing speed, but most of us are well below that.


Do not be afraid to test 13 and 15 degree drivers - the final results may surprise you!


Tony

Monday, August 31, 2009

What IS My Driver Loft?

I think that everyone who buys a driver through a web site deserves to be sure they are getting what they think they are getting. I had some experiences this past week or so with clients that made me want to share some simple information with you about drivers.


If you buy a driver from a web service provider and the advertisement says that it is "10.5 degrees of loft" can you be SURE that is the loft of the driver? Well............maybe.............sort of. Here are some simple things that you should really know about buying a driver sight unseen!


1. There are two things that determine the True Loft of a driver AS YOU PLAY IT....The real measured loft of the face, and the FACE ANGLE of the driver.


2. In recent years, most drivers I have seen in stores have some amount of Closed Face Angle to them. This means that when you set the driver so the face is flat on the ground and you do not attempt to manipulate it so that the face is square to the target line, that the face will look a little shut to the target line. Some players can actually benefit from a closed face angle particularly if the slice the ball........the close face can help them to somewhat reduce the amount of their slice.


3. However.....if you have a driver that for example has 10 degrees of loft, and say it has a 2 degree closed face angle. Now if you set this driver face so that the face is square to the target line......the EFFECTIVE LOFT of the driver face will actually be 12 degrees. And you might wonder why you hit that driver higher than you think you should.


4. And the opposite holds true. If you have a driver with 10 degrees of loft and 2 degrees open face angle, and you square the face, then the Effective Loft of that driver will be 8 degrees.


My tip to you then, particularly if you want to play with a driver that has a face that is square to the target line at address...... Make sure you know what you are buying before you click "Purchase." If you want a 10 degree driver with 0 degree face angle, be sure that is what you are buying!


Tony